Upton Barn Door Hardware

A combination of modern design and vintage construction; the Upton Sliding Barn Door Hardware offers a simple design with the touch of a wooden wheel to attain the perfect sliding barn door hardware.

Holds up to 150lbs

Need Help? Call 801.698.2641


The Upton Sliding Barn Door Hardware has been designed and refined over the years to create a mashup of metal and wood; a unique barn door hardware that boasts a unique and sleek design. Similar to other styles, the Upton is unique in its carefully crafted barn door hanger. The barn door hangers are made one by one to achieve the perfect shape that flows effortlessly into the shape of the wheel.

Unique Quality Factors

  • Powder Coated Finish
  • Wood Wheel Design
  • Unique Bolts for Sleek Design
  • Interior Application

The Upton Sliding Barn Door Hardware is made from 3/16" cold rolled steel. The strap itself is 1" in width. The wheel and strap design are able to hold up to a 150lb door. The wheel is 5" in width, lathed to fit the track perfectly and produce the ultimate smooth roll. Each wheel has a bearing, adding to the effortless function and limiting the sound emitted when the door is opening and closing.

Included in each barn door hardware set:

  • 2 barn door hangers with wheels
  • Barn door track width is 1 1/2" (length ordered)
  • Standoffs and Lag Bolts
  • 2 stops, attach to the end of the track to prevent door from rolling off track
  • 1 stay guide (Selected from options of guides)
  • Bolts, nuts, washers needed to hang the hardware

*Any track longer than 9ft must be shipped in 2 pieces.

Write Your Own Review
Review this product:Upton Barn Door Hardware
Your Rating

Standard vs Pre-Hung

The Standard system is our most popular and basic set of hardware. The hardware comes with hangers, a track, and all the components to hang the hardware. The Pre-Hung system takes it a step further, and simplifies installation. The track comes installed on a header board. This leaves installation to require attaching hangers to door, and then screwing the header into the wall. With a standard system you need to first attach the bolts through the track and spacers, attach the stops, and place the hangers. Learn more about the Patented Pre-Hung option below.


The track arrives installed on a header board. Instead of assembling the loose components of spacers, lag bolts, stops, and stop bolts, you simply have one piece ready to hang.


Simply place the header over the opening and screw through the header and into the studs in the wall. Screws will be provided in the order.

Single Door System

Select a single door system when you are looking to purchase a hardware set for one door. This option will include all the components, hangers (2), and track to hang your single door.

Bi-Parting (Double Door) System

Select a bi-parting door system when you are looking to hang 2 doors over one opening. This option will include all the components, hangers (4), and track to hang 2 doors on a single track. This option includes 4 hangers, one track at specified length, and all components to hang.

Single Door System

We realize there are some creative people with creative ideas. Select this option if you need a system that is different from a single or double door installation. You will then be asked to specify the number of hangers you need to complete the job. If you don't see what you need, email us at info@artisanhardware.com.

Choose from our variety of high end finishes to find the perfect fit for your job. The Raw Steel option has no finish. All standard colors are powder coated. Stainless is high quality stainless steel. And Chrome and other unique finishes are part of a high end finishing process to give you the best product possible.

Door Guides

We offer a wide selection of door guides to best fit the needs of your installation. The L-Shape Door guide is the standard guide included with each kit at no additional cost, with all other guides available for upgrade. Learn more below.



Stay Roller

Wall Mount

Wall Mount U-Roller

The standard track length should be twice the width of the door itself. If needed, note that tracks less than twice the width may prevent the door from opening fully, and tracks longer will allow the door to slide further past the opening.

Pre-Drilled holes will have standard 16″ on center spacing. This is ideal for installations with a full header or backing in the wall. If you are attaching into studs, you will want to drill on site to ensure you’re holes match up.

Select the handle style and quantity for your project. The handle will be sent in the same finish color as the hardware.

Flush handles are intended for use on the inside of the barn door as the inset design allows the door to be fully opened. Pull handles on the inside of the door will bump into the door frame or wall when opened. Select the quantity and the finish color will match the rest of your hardware.

If your barn door requires privacy, select between our Tear Drop Lock and a Hook and Eye option

Tear Drop Lock

Hook and Eye Lock

Hook Eye

Tear Drop Lock