Start of Summer Sale! Use coupon summer to save 10% on all products!

Vintage Top Mount Barn Door Hardware

$ 329.00

The Vintage Top Mount Barn Door Hardware captures the rustic look of the spoke wheel, and combines it with the more modern and contemporary top mount system to create a universally appealing piece of hardware that can be used in any home decor.

Clearance needed above top of door: 9″.Weight limit is 200lbs.

Finish

Black Finish
Raw Finish
Oil Bronzed Finish +$20
Custom Color +$125

Custom Color

Track Info:

Any track over 9ft will be sent in two pieces with a splice kit. ?

Feet *

Inches

Track Pre-Drilled

Door Guide

?

L Shaped Floor Mount Guide
U Shaped Floor Mount Guide +$5
Wall Mount Guide +$15
Stay Roller Guide +$30
Wall Mount U-Roller Guide +$30

Add Door Pull

Signature Handle +$25
Standard Pull Handle +$35
Simple Handle +$45
Transitional Handle +$50
Stainless Flat Handle +$40
No Handle

Add Flush Handle

Flush Mount +$35
No Flush Handle

Add Hardware for Multiple Doors on Track

Purchasing an additional door kit will double your order of selected hangers, handles, and guides. ?

Upgrade to Pre-Hung

?For FAST and EASY Install. Track comes installed on a header board. (additional lead time may be required)

Description

Each set of barn door hardware ordered includes the following:

  • All Hardware is Powder Coated
  • 2 Vintage Top Mount Hangers and Wheels
  • Track at specified Length
  • Spacers and Lag Bolts
  • Door Stops
  • 2″ Door Guide
  • All necessary bolts, nuts, and washers.

Weight Limit: 200lbs

The Vintage Top Mount Barn Door Hardware is mounted to the top of the door, allowing a unique emphasis to remain on the door itself, while also inviting a separate focus on the hardware itself. The 5” spoke wheel is American made in a foundry to an exact precision and specification. The hanger is attached by drilling down into the top of the door, and does not require any drilling through the door. Historically, the top mount style of hardware is used as a more modern or contemporary look because it never infringes on the face of the door – a perfect match to any of our sliding barn doors. The wheel has an inset oil bushing that limits the noise roll and lightens the load needed to open or close. Designed, manufactured, and approved by Artisans.

The Vintage Top Mount hanger attaches to the top of the door. To create the most strength possible, each hanger has a baseplate with four ¼” holes. The exact screw used depends on the door weight and material, however the four connection points per hanger ensure that weight will not be an issue.

To purchase hardware for a double door, select two additional door straps (The nuts, washers, bolts, stops, and guides needed for installation are included)

Any track longer than 9ft must be shipped in 2 pieces

Specifications

Below are detailed images with product specifications.

JS Calculator

Number 1:
Number 2:
Get Result:

Standard L-Shaped Door Guide.

This is a our most popular door guide and attaches to the floor. It functions best with a channel cut out of the bottom of the door so the guide is not visible to the eye.

U-Shapped Door Guide

This guide is an option if your door does not have a channel to receive the L-Shaped door guide. It attaches to the floor and acts as a U-channel for the door to glide through.

Wall Mount Door Guide

This guide is an effective option if it is better suited to install the guide into the baseboard rather than the floor. It is adjustable so you ensure the best fit for your door.

Stay Roller Guide

Use this guide for a smooth rolling door guide that requires no groove in the door. It also adds an industrial style as the wheel is visible while door slides.

Track Length

The track length should be twice the width of the door itself. If needed, note that tracks less than twice the width may prevent the door from opening fully, and tracks longer will allow the door to slide further past the opening.

Pre-Drill or Not?

Pre-Drilled holes with have standard 16″ on center spacing. This is ideal for installations with a full header or backing in the wall. If you are attaching into studs, you will want to drill on site to ensure you’re holes match up.

All hardware sets include 2 straps with wheels and all the hardware to hang one door. Sometimes more doors are better than one, and multiple doors will slide on the same track. In these cases, you will want to purchase additional door straps, 2 for each door. Heavier doors may need more than the standard 2 straps (over 300lbs), and some creative projects require more as well. In these instances, add some door hangers and enjoy your own unique design!

Every 2 Additional Hangers Include Bottom Guide and Pair of Stops

 

Pre-Hung Hardware | Patent Pending Design

prehunglist
prehungsteps

What it Means

The track arrives installed on a header board. Instead of assembling the loose components of spacers, lag bolts, stops, and stop bolts, you simply have one piece ready to hang.

How to Install the Header

Simply place the header over the opening and screw through the header and into the studs in the wall. Screws will be provided in the order.

Expedited Shipping

Make this selection if you are needing to recieve this item in under 3 days.

Note: Don’t hesitate to call with any questions. If you have a unique situation, we will do everything in our power to deliver.

Here at Artisan Hardware, we do our best to stock all of our products and their variations, but our products are in high demand!

We have consistently tripled our total orders year over year, and that is due to our incredible customer service and our hand-made, no-compromises, made-in-America, high-quality products.

All our doors come with the option of having it Painted, Stained, or in Raw Unfinished.

Painted

With our painted option, you’ll have access to all of Benjamin Moore’s paint colors at your finger tips. This gives you over 2000+ options to choose from to find that perfect color that you need.

Stained

Easily select the perfect stain for your door with a click of a button. With the use Minwax’s most popular line of stains, you have the selection of beautiful, high-quality stains that offer a timeless, lasting look.

Raw Unfinished

By selecting this option, your door will be delivered to you sanded and prepped, but without any stains or paint. This is a great option for those planning on staining or painting themselves.

Along with our 3 Door Finishes, we offer an additional 3 Door Stylings to add that unique touch and personality.

Antiqued

Antiqued is the process of taking a painted door and sanding different areas of the door to give it added character and age. Once the door is sanded, a coat of stain is placed on the door and then wiped off, leaving the sanded areas with a unique stained/weathered look. There’s thousands of combinations that you can choose from depending on the paint and stain chosen.

Weathered

Weathered is sanded in different parts like our Antiqued, just without the final step of staining the sanded parts. Weathered is a great option to give your door a naturally aged and rustic look.

Lacquer Clear Coat

Like the name suggests, a clear coat of lacquer is applied to the door. This is not only a great protectant to have over the paint or stain on the door, but also adds a nice sleek, shine to give a little extra something to the door.